There are a variety of Pros and Cons associated with water well service, including the maintenance, mineral content, and fluoride levels. Read on to learn more about the benefits and disadvantages of water well service for your home. Ultimately, deciding whether to have a water well installed at your home is very personal.
There are many benefits of having a well but also some disadvantages. First, a well has a limited supply of water. The cost of drilling a well can be expensive and risky. There are also no guarantees that your well will produce enough water or be of good quality. Connecting to a water district eliminates this risk and provides a more reliable water source. Second, wells are inconvenient to maintain. You may experience problems that need expensive repairs. Finally, you may experience power outages that cause you to lose water service.
Third, well water may contain contaminants. Well water is not treated with chemicals so it may have bacteria. However, proper sealing and filtration can prevent bacteria from damaging your water supply. In addition, water may take time to travel from your well to your faucets.
To keep the water well functioning optimally, it must receive regular maintenance. One way to do this is by observing extra caution around the well. For example, it is best to keep pesticides, fertilizers, motor oil, and other chemicals away from the thriving area. These can compromise the quality of water from the well.
You can also check the water well service Brazoria County periodically. If there is a noticeable change in the water level, it can be an indication of a problem with your filters. Although most contaminants are colorless and unnoticeable to the naked eye, most wells eventually develop bacteria and nitrates. If you notice any of these contaminants in your healthy water, you should seek professional help.
The new recommendation by the PHS to remove fluoride from drinking water from homes comes after an interdepartmental panel of scientists convened by HHS. The panel included members of the CDC, National Institutes of Health, U.S. Food and Drug Administration, EPA, and Department of Agriculture. However, the new recommendation does not apply to community water systems that use naturally occurring fluoride below 0.7 mg/L.
It is essential to test drinking water for fluoride content. While fluoride is present in nearly all water, the content of fluoride in well water is difficult to determine without a lab test. Contact your local public health department or the U.S. Environmental Protection Agency (EPA) to have your water tested.
You can have a water well service analyze the mineral content of your healthy water. For example, the levels of Ca2+, Mg2+, and Na2+ are essential for human health, and not enough of these minerals can cause health problems. On the other hand, excessive levels of certain minerals may increase the risk of disease, especially for people with heart problems.
The mineral content of tap water varies significantly across North America. Surface water is generally higher in Mg2+ and Na+ than groundwater. However, this does not necessarily mean that your healthy water is contaminated. Some cities have high levels of these minerals, while others have relatively low levels.
The price of water well service depends on a few factors. First, you’ll need a pump to transfer water from below ground to your home. Pump units can cost anywhere from $345 to $1,380. You’ll also need a casing pipe to prevent the well from collapsing and serve as wall support. PVC pipe casing is inexpensive at $6 to $10 per foot, while stainless steel pipe casing costs $38 to $115 per foot.
In some regions, deeper wells are necessary to reach the water table. For example, soil in California requires a more bottomless well than in Arizona, which has rocky and dry soil. Depending on the soil type, a well can range from 25 feet to 1,000 feet deep. But, each additional foot of casing adds another $15 to $60 to the bill. Other expenses can include permits and additional labor.